24 Buat Scrollbar Pada Artikel Panjang

Scrollbar merupakan satu item bagi membantu meringkaskan sebarang artikel, komen, gambar atau apa saja. Dengan adanya Scrollbar, blog akan kelihatan kemas dan mana artikel yang panjang akan menjadi ringkas dan teratur. Ia juga boleh diaplikasikan pada Sidebar Widget seperti Widget Popular Post dan Widget Blog Archive.

Lihat contoh Scrollbar dan Cara Penghasilannya:

♦ Scrollbar Tanpa Border:

1. CCTV CAMERAS AND HOUSINGS

A. Provide cameras complete with Vandal-Resistant surface mount housings, mounting hardware and brackets as necessary. Provide, at minimum, housings having accessible maintenance facilities. Provide power and signal cable harnesses and connectors as suitable to allow for the ease of removal or replacement of a camera. The housings are subject to approval by the Engineer and S.O.

B. Video cables shall have no more than one splice between camera and controller bay/video amplifier. Use coaxial copper or glass fibred cable throughout. Do not exceed the CCTV equipment manufacturer’s recommendations for any cable run.

C. Provide only CCD color cameras having, at minimum, the following attributes:

• Signal System - PAL : 625 Lines
  
• Scanning System - 2:1 Interlace
  
• Total Pixels No. - 470K
  
• S/N Ratio - More Than 48dB (AGC Off)
  
• Resolution - Horizontal : 480 TV Lines
  
• Video Output Level - 1.0Vp-p (75ohm. Composite)
  
• Lens - Fixed Lens (f = 2.4 - 6mm)
  
• Sync. System - Internal
  
• Sensitivity - 0.O1 Lax
  
• Electronic Shutter - 1/50-1/10.000sec
  
• BLC - Auto
  
• White Balance - Auto
  
• AGC - Auto
  
• Supplied Voltage- DC9V-15V (Recommendation : DC 12V+/-0.5V)
  
• Power Consumption - Less Than 150mA
  
• Weight - Approx. 450q
  
• Dome Size – 100mm
  
• Connector - Video (Yellow), Power (Red), GND (Black)
  

D. For copper cabling runs over 100m in length use either RG-59 cabling with line equalization and/or signal bolstering or RG-6 cabling. Signal runs over 150m in length and main inter controller switcher runs shall be in glass fibred cabling only.

E. Provide all cameras with auto-iris and bloom-reducing lens facilities giving low distortion imaging. 1/3 inch format cameras may be supplied providing that the indicated and required fields of view and light level performances are attained.

F. Final details of locations and mountings shall be approved by the Engineer.

Kod:

<div style="overflow:auto;width:100%;height:200px;padding:0px">

- TEKS ANDA -

</div>

♦ Scrollbar Dengan Border:

1. CCTV CAMERAS AND HOUSINGS

A. Provide cameras complete with Vandal-Resistant surface mount housings, mounting hardware and brackets as necessary. Provide, at minimum, housings having accessible maintenance facilities. Provide power and signal cable harnesses and connectors as suitable to allow for the ease of removal or replacement of a camera. The housings are subject to approval by the Engineer and S.O.

B. Video cables shall have no more than one splice between camera and controller bay/video amplifier. Use coaxial copper or glass fibred cable throughout. Do not exceed the CCTV equipment manufacturer’s recommendations for any cable run.

C. Provide only CCD color cameras having, at minimum, the following attributes:

• Signal System - PAL : 625 Lines
  
• Scanning System - 2:1 Interlace
  
• Total Pixels No. - 470K
  
• S/N Ratio - More Than 48dB (AGC Off)
  
• Resolution - Horizontal : 480 TV Lines
  
• Video Output Level - 1.0Vp-p (75ohm. Composite)
  
• Lens - Fixed Lens (f = 2.4 - 6mm)
  
• Sync. System - Internal
  
• Sensitivity - 0.O1 Lax
  
• Electronic Shutter - 1/50-1/10.000sec
  
• BLC - Auto
  
• White Balance - Auto
  
• AGC - Auto
  
• Supplied Voltage- DC9V-15V (Recommendation : DC 12V+/-0.5V)
  
• Power Consumption - Less Than 150mA
  
• Weight - Approx. 450q
  
• Dome Size – 100mm
  
• Connector - Video (Yellow), Power (Red), GND (Black)
  

D. For copper cabling runs over 100m in length use either RG-59 cabling with line equalization and/or signal bolstering or RG-6 cabling. Signal runs over 150m in length and main inter controller switcher runs shall be in glass fibred cabling only.

E. Provide all cameras with auto-iris and bloom-reducing lens facilities giving low distortion imaging. 1/3 inch format cameras may be supplied providing that the indicated and required fields of view and light level performances are attained.

F. Final details of locations and mountings shall be approved by the Engineer.

Kod:

<div style="overflow:auto;width:100%;height:200px;padding:0px;border:5px groove #ff0000">

- TEKS ANDA -

</div>

♦ Scrollbar Dengan Border dan Jarak Lebar Tertentu:

1. CCTV CAMERAS AND HOUSINGS

A. Provide cameras complete with Vandal-Resistant surface mount housings, mounting hardware and brackets as necessary. Provide, at minimum, housings having accessible maintenance facilities. Provide power and signal cable harnesses and connectors as suitable to allow for the ease of removal or replacement of a camera. The housings are subject to approval by the Engineer and S.O.

B. Video cables shall have no more than one splice between camera and controller bay/video amplifier. Use coaxial copper or glass fibred cable throughout. Do not exceed the CCTV equipment manufacturer’s recommendations for any cable run.

C. Provide only CCD color cameras having, at minimum, the following attributes:

• Signal System - PAL : 625 Lines
  
• Scanning System - 2:1 Interlace
  
• Total Pixels No. - 470K
  
• S/N Ratio - More Than 48dB (AGC Off)
  
• Resolution - Horizontal : 480 TV Lines
  
• Video Output Level - 1.0Vp-p (75ohm. Composite)
  
• Lens - Fixed Lens (f = 2.4 - 6mm)
  
• Sync. System - Internal
  
• Sensitivity - 0.O1 Lax
  
• Electronic Shutter - 1/50-1/10.000sec
  
• BLC - Auto
  
• White Balance - Auto
  
• AGC - Auto
  
• Supplied Voltage- DC9V-15V (Recommendation : DC 12V+/-0.5V)
  
• Power Consumption - Less Than 150mA
  
• Weight - Approx. 450q
  
• Dome Size – 100mm
  
• Connector - Video (Yellow), Power (Red), GND (Black)
  

D. For copper cabling runs over 100m in length use either RG-59 cabling with line equalization and/or signal bolstering or RG-6 cabling. Signal runs over 150m in length and main inter controller switcher runs shall be in glass fibred cabling only.

E. Provide all cameras with auto-iris and bloom-reducing lens facilities giving low distortion imaging. 1/3 inch format cameras may be supplied providing that the indicated and required fields of view and light level performances are attained.

F. Final details of locations and mountings shall be approved by the Engineer.

Kod:

<div style="overflow:auto;width:500px;height:200px;padding:0px;border:2px solid #aaa">

- TEKS ANDA -

</div>

♦ Scrollbar Dengan Border, Jarak Lebar Tertentu dan Posisi 'Center':

1. CCTV CAMERAS AND HOUSINGS

A. Provide cameras complete with Vandal-Resistant surface mount housings, mounting hardware and brackets as necessary. Provide, at minimum, housings having accessible maintenance facilities. Provide power and signal cable harnesses and connectors as suitable to allow for the ease of removal or replacement of a camera. The housings are subject to approval by the Engineer and S.O.

B. Video cables shall have no more than one splice between camera and controller bay/video amplifier. Use coaxial copper or glass fibred cable throughout. Do not exceed the CCTV equipment manufacturer’s recommendations for any cable run.

C. Provide only CCD color cameras having, at minimum, the following attributes:

• Signal System - PAL : 625 Lines
  
• Scanning System - 2:1 Interlace
  
• Total Pixels No. - 470K
  
• S/N Ratio - More Than 48dB (AGC Off)
  
• Resolution - Horizontal : 480 TV Lines
  
• Video Output Level - 1.0Vp-p (75ohm. Composite)
  
• Lens - Fixed Lens (f = 2.4 - 6mm)
  
• Sync. System - Internal
  
• Sensitivity - 0.O1 Lax
  
• Electronic Shutter - 1/50-1/10.000sec
  
• BLC - Auto
  
• White Balance - Auto
  
• AGC - Auto
  
• Supplied Voltage- DC9V-15V (Recommendation : DC 12V+/-0.5V)
  
• Power Consumption - Less Than 150mA
  
• Weight - Approx. 450q
  
• Dome Size – 100mm
  
• Connector - Video (Yellow), Power (Red), GND (Black)
  

D. For copper cabling runs over 100m in length use either RG-59 cabling with line equalization and/or signal bolstering or RG-6 cabling. Signal runs over 150m in length and main inter controller switcher runs shall be in glass fibred cabling only.

E. Provide all cameras with auto-iris and bloom-reducing lens facilities giving low distortion imaging. 1/3 inch format cameras may be supplied providing that the indicated and required fields of view and light level performances are attained.

F. Final details of locations and mountings shall be approved by the Engineer.

Kod:

<center><div style="overflow:auto;width:500px;height:200px;padding:0px;border:2px solid #aaa"><div align="justify">

- TEKS ANDA -

</div></div></center>

Nota:

• Kod warna merah:
  Untuk menambahkan/mengurangkan jarak lebar Scrollbar
  *nilai jarak lebar Scrollbar boleh dimasukkan dalam unit % atau px
• Kod warna biru:
  Untuk menambahkan/mengurangkan jarak tinggi Scrollbar yang dikehendaki
• Kod warna hijau:
  Untuk menukar ketebalan border pada Scrollbar
• Kod warna ungu:
  Untuk menukar jenis border pada Scrollbar
*klik untuk mendapatkan jenis-jenis border lain
• Kod warna pink:
  Untuk menukar warna border pada Scrollbar
*klik untuk mendapatkan kod-kod warna lain
• Kod warna aqua/cyan:
  Untuk menentukan posisi teks/gambar dalam Scrollbar. Posisi boleh diubah dengan menukarkan justify kepada right, center atau left

Sila Share Post CK Ini Sekiranya Anda Suka

• @Facebook
• @Twitter
• @Google+

​Dapatkan Widget Ini!