Scrollbar merupakan satu item bagi membantu meringkaskan sebarang artikel, komen, gambar atau apa saja. Dengan adanya Scrollbar, blog akan kelihatan kemas dan mana artikel yang panjang akan menjadi ringkas dan teratur. Ia juga boleh diaplikasikan pada Sidebar Widget seperti Widget Popular Post dan Widget Blog Archive.
♦ Scrollbar Tanpa Border:
1. CCTV CAMERAS AND HOUSINGS
A. Provide cameras complete with Vandal-Resistant surface mount housings, mounting hardware and brackets as necessary. Provide, at minimum, housings having accessible maintenance facilities. Provide power and signal cable harnesses and connectors as suitable to allow for the ease of removal or replacement of a camera. The housings are subject to approval by the Engineer and S.O.
B. Video cables shall have no more than one splice between camera and controller bay/video amplifier. Use coaxial copper or glass fibred cable throughout. Do not exceed the CCTV equipment manufacturer’s recommendations for any cable run.
C. Provide only CCD color cameras having, at minimum, the following attributes:
D. For copper cabling runs over 100m in length use either RG-59 cabling with line equalization and/or signal bolstering or RG-6 cabling. Signal runs over 150m in length and main inter controller switcher runs shall be in glass fibred cabling only.
E. Provide all cameras with auto-iris and bloom-reducing lens facilities giving low distortion imaging. 1/3 inch format cameras may be supplied providing that the indicated and required fields of view and light level performances are attained.
F. Final details of locations and mountings shall be approved by the Engineer.
A. Provide cameras complete with Vandal-Resistant surface mount housings, mounting hardware and brackets as necessary. Provide, at minimum, housings having accessible maintenance facilities. Provide power and signal cable harnesses and connectors as suitable to allow for the ease of removal or replacement of a camera. The housings are subject to approval by the Engineer and S.O.
B. Video cables shall have no more than one splice between camera and controller bay/video amplifier. Use coaxial copper or glass fibred cable throughout. Do not exceed the CCTV equipment manufacturer’s recommendations for any cable run.
C. Provide only CCD color cameras having, at minimum, the following attributes:
- Signal System - PAL : 625 Lines
- Scanning System - 2:1 Interlace
- Total Pixels No. - 470K
- S/N Ratio - More Than 48dB (AGC Off)
- Resolution - Horizontal : 480 TV Lines
- Video Output Level - 1.0Vp-p (75ohm. Composite)
- Lens - Fixed Lens (f = 2.4 - 6mm)
- Sync. System - Internal
- Sensitivity - 0.O1 Lax
- Electronic Shutter - 1/50-1/10.000sec
- BLC - Auto
- White Balance - Auto
- AGC - Auto
- Supplied Voltage- DC9V-15V (Recommendation : DC 12V+/-0.5V)
- Power Consumption - Less Than 150mA
- Weight - Approx. 450q
- Dome Size – 100mm
- Connector - Video (Yellow), Power (Red), GND (Black)
D. For copper cabling runs over 100m in length use either RG-59 cabling with line equalization and/or signal bolstering or RG-6 cabling. Signal runs over 150m in length and main inter controller switcher runs shall be in glass fibred cabling only.
E. Provide all cameras with auto-iris and bloom-reducing lens facilities giving low distortion imaging. 1/3 inch format cameras may be supplied providing that the indicated and required fields of view and light level performances are attained.
F. Final details of locations and mountings shall be approved by the Engineer.
<div style="overflow:auto;width:100%;height:200px;padding:0px">
- TEKS ANDA -
</div>
- TEKS ANDA -
</div>
♦ Scrollbar Dengan Border:
1. CCTV CAMERAS AND HOUSINGS
A. Provide cameras complete with Vandal-Resistant surface mount housings, mounting hardware and brackets as necessary. Provide, at minimum, housings having accessible maintenance facilities. Provide power and signal cable harnesses and connectors as suitable to allow for the ease of removal or replacement of a camera. The housings are subject to approval by the Engineer and S.O.
B. Video cables shall have no more than one splice between camera and controller bay/video amplifier. Use coaxial copper or glass fibred cable throughout. Do not exceed the CCTV equipment manufacturer’s recommendations for any cable run.
C. Provide only CCD color cameras having, at minimum, the following attributes:
D. For copper cabling runs over 100m in length use either RG-59 cabling with line equalization and/or signal bolstering or RG-6 cabling. Signal runs over 150m in length and main inter controller switcher runs shall be in glass fibred cabling only.
E. Provide all cameras with auto-iris and bloom-reducing lens facilities giving low distortion imaging. 1/3 inch format cameras may be supplied providing that the indicated and required fields of view and light level performances are attained.
F. Final details of locations and mountings shall be approved by the Engineer.
A. Provide cameras complete with Vandal-Resistant surface mount housings, mounting hardware and brackets as necessary. Provide, at minimum, housings having accessible maintenance facilities. Provide power and signal cable harnesses and connectors as suitable to allow for the ease of removal or replacement of a camera. The housings are subject to approval by the Engineer and S.O.
B. Video cables shall have no more than one splice between camera and controller bay/video amplifier. Use coaxial copper or glass fibred cable throughout. Do not exceed the CCTV equipment manufacturer’s recommendations for any cable run.
C. Provide only CCD color cameras having, at minimum, the following attributes:
- Signal System - PAL : 625 Lines
- Scanning System - 2:1 Interlace
- Total Pixels No. - 470K
- S/N Ratio - More Than 48dB (AGC Off)
- Resolution - Horizontal : 480 TV Lines
- Video Output Level - 1.0Vp-p (75ohm. Composite)
- Lens - Fixed Lens (f = 2.4 - 6mm)
- Sync. System - Internal
- Sensitivity - 0.O1 Lax
- Electronic Shutter - 1/50-1/10.000sec
- BLC - Auto
- White Balance - Auto
- AGC - Auto
- Supplied Voltage- DC9V-15V (Recommendation : DC 12V+/-0.5V)
- Power Consumption - Less Than 150mA
- Weight - Approx. 450q
- Dome Size – 100mm
- Connector - Video (Yellow), Power (Red), GND (Black)
D. For copper cabling runs over 100m in length use either RG-59 cabling with line equalization and/or signal bolstering or RG-6 cabling. Signal runs over 150m in length and main inter controller switcher runs shall be in glass fibred cabling only.
E. Provide all cameras with auto-iris and bloom-reducing lens facilities giving low distortion imaging. 1/3 inch format cameras may be supplied providing that the indicated and required fields of view and light level performances are attained.
F. Final details of locations and mountings shall be approved by the Engineer.
<div style="overflow:auto;width:100%;height:200px;padding:0px;border:5px groove #ff0000">
- TEKS ANDA -
</div>
- TEKS ANDA -
</div>
♦ Scrollbar Dengan Border dan Jarak Lebar Tertentu:
1. CCTV CAMERAS AND HOUSINGS
A. Provide cameras complete with Vandal-Resistant surface mount housings, mounting hardware and brackets as necessary. Provide, at minimum, housings having accessible maintenance facilities. Provide power and signal cable harnesses and connectors as suitable to allow for the ease of removal or replacement of a camera. The housings are subject to approval by the Engineer and S.O.
B. Video cables shall have no more than one splice between camera and controller bay/video amplifier. Use coaxial copper or glass fibred cable throughout. Do not exceed the CCTV equipment manufacturer’s recommendations for any cable run.
C. Provide only CCD color cameras having, at minimum, the following attributes:
D. For copper cabling runs over 100m in length use either RG-59 cabling with line equalization and/or signal bolstering or RG-6 cabling. Signal runs over 150m in length and main inter controller switcher runs shall be in glass fibred cabling only.
E. Provide all cameras with auto-iris and bloom-reducing lens facilities giving low distortion imaging. 1/3 inch format cameras may be supplied providing that the indicated and required fields of view and light level performances are attained.
F. Final details of locations and mountings shall be approved by the Engineer.
A. Provide cameras complete with Vandal-Resistant surface mount housings, mounting hardware and brackets as necessary. Provide, at minimum, housings having accessible maintenance facilities. Provide power and signal cable harnesses and connectors as suitable to allow for the ease of removal or replacement of a camera. The housings are subject to approval by the Engineer and S.O.
B. Video cables shall have no more than one splice between camera and controller bay/video amplifier. Use coaxial copper or glass fibred cable throughout. Do not exceed the CCTV equipment manufacturer’s recommendations for any cable run.
C. Provide only CCD color cameras having, at minimum, the following attributes:
- Signal System - PAL : 625 Lines
- Scanning System - 2:1 Interlace
- Total Pixels No. - 470K
- S/N Ratio - More Than 48dB (AGC Off)
- Resolution - Horizontal : 480 TV Lines
- Video Output Level - 1.0Vp-p (75ohm. Composite)
- Lens - Fixed Lens (f = 2.4 - 6mm)
- Sync. System - Internal
- Sensitivity - 0.O1 Lax
- Electronic Shutter - 1/50-1/10.000sec
- BLC - Auto
- White Balance - Auto
- AGC - Auto
- Supplied Voltage- DC9V-15V (Recommendation : DC 12V+/-0.5V)
- Power Consumption - Less Than 150mA
- Weight - Approx. 450q
- Dome Size – 100mm
- Connector - Video (Yellow), Power (Red), GND (Black)
D. For copper cabling runs over 100m in length use either RG-59 cabling with line equalization and/or signal bolstering or RG-6 cabling. Signal runs over 150m in length and main inter controller switcher runs shall be in glass fibred cabling only.
E. Provide all cameras with auto-iris and bloom-reducing lens facilities giving low distortion imaging. 1/3 inch format cameras may be supplied providing that the indicated and required fields of view and light level performances are attained.
F. Final details of locations and mountings shall be approved by the Engineer.
<div style="overflow:auto;width:500px;height:200px;padding:0px;border:2px solid #aaa">
- TEKS ANDA -
</div>
- TEKS ANDA -
</div>
♦ Scrollbar Dengan Border, Jarak Lebar Tertentu dan Posisi 'Center':
1. CCTV CAMERAS AND HOUSINGS
A. Provide cameras complete with Vandal-Resistant surface mount housings, mounting hardware and brackets as necessary. Provide, at minimum, housings having accessible maintenance facilities. Provide power and signal cable harnesses and connectors as suitable to allow for the ease of removal or replacement of a camera. The housings are subject to approval by the Engineer and S.O.
B. Video cables shall have no more than one splice between camera and controller bay/video amplifier. Use coaxial copper or glass fibred cable throughout. Do not exceed the CCTV equipment manufacturer’s recommendations for any cable run.
C. Provide only CCD color cameras having, at minimum, the following attributes:
D. For copper cabling runs over 100m in length use either RG-59 cabling with line equalization and/or signal bolstering or RG-6 cabling. Signal runs over 150m in length and main inter controller switcher runs shall be in glass fibred cabling only.
E. Provide all cameras with auto-iris and bloom-reducing lens facilities giving low distortion imaging. 1/3 inch format cameras may be supplied providing that the indicated and required fields of view and light level performances are attained.
F. Final details of locations and mountings shall be approved by the Engineer.
A. Provide cameras complete with Vandal-Resistant surface mount housings, mounting hardware and brackets as necessary. Provide, at minimum, housings having accessible maintenance facilities. Provide power and signal cable harnesses and connectors as suitable to allow for the ease of removal or replacement of a camera. The housings are subject to approval by the Engineer and S.O.
B. Video cables shall have no more than one splice between camera and controller bay/video amplifier. Use coaxial copper or glass fibred cable throughout. Do not exceed the CCTV equipment manufacturer’s recommendations for any cable run.
C. Provide only CCD color cameras having, at minimum, the following attributes:
- Signal System - PAL : 625 Lines
- Scanning System - 2:1 Interlace
- Total Pixels No. - 470K
- S/N Ratio - More Than 48dB (AGC Off)
- Resolution - Horizontal : 480 TV Lines
- Video Output Level - 1.0Vp-p (75ohm. Composite)
- Lens - Fixed Lens (f = 2.4 - 6mm)
- Sync. System - Internal
- Sensitivity - 0.O1 Lax
- Electronic Shutter - 1/50-1/10.000sec
- BLC - Auto
- White Balance - Auto
- AGC - Auto
- Supplied Voltage- DC9V-15V (Recommendation : DC 12V+/-0.5V)
- Power Consumption - Less Than 150mA
- Weight - Approx. 450q
- Dome Size – 100mm
- Connector - Video (Yellow), Power (Red), GND (Black)
D. For copper cabling runs over 100m in length use either RG-59 cabling with line equalization and/or signal bolstering or RG-6 cabling. Signal runs over 150m in length and main inter controller switcher runs shall be in glass fibred cabling only.
E. Provide all cameras with auto-iris and bloom-reducing lens facilities giving low distortion imaging. 1/3 inch format cameras may be supplied providing that the indicated and required fields of view and light level performances are attained.
F. Final details of locations and mountings shall be approved by the Engineer.
<center><div style="overflow:auto;width:500px;height:200px;padding:0px;border:2px solid #aaa"><div align="justify">
- TEKS ANDA -
</div></div></center>
- TEKS ANDA -
</div></div></center>
Nota:
-
Kod warna merah:
Untuk menambahkan/mengurangkan jarak lebar Scrollbar
*nilai jarak lebar Scrollbar boleh dimasukkan dalam unit % atau px -
Kod warna biru:
Untuk menambahkan/mengurangkan jarak tinggi Scrollbar yang dikehendaki -
Kod warna hijau:
Untuk menukar ketebalan border pada Scrollbar -
Kod warna ungu:
Untuk menukar jenis border pada Scrollbar
*klik untuk mendapatkan jenis-jenis border lain
-
Kod warna pink:
Untuk menukar warna border pada Scrollbar
*klik untuk mendapatkan kod-kod warna lain
-
Kod warna aqua/cyan:
Untuk menentukan posisi teks/gambar dalam Scrollbar. Posisi boleh diubah dengan menukarkan justify kepada right, center atau left
nice sharing
ReplyDeleteThanks dear ;)
DeleteTQ.. saya cuba apply kat blog saya :-)
ReplyDeleteBoleh. Thanks ya puteri airyn ;)
Deleteni guna kod html ye CK?
ReplyDeleteA'ah mama. yg ni gerenti mudah. Tambah kod div tu jer ;)
Deletedah try, tapi susah nak jugak nak coding, bila paste ctrl +F tu, jadi error..
DeleteMama buat dalam template ye?...kod scrollbar ni sesuai untuk post atau page. Kalau nak masukkan dlm template, kena cari tempat yang mana kita perlu letak scrollbar ni...kalau ada ape2 mama roger jer CK...
Deletekalau nak buat scrollbar yang cantik dan ada border dalam kotak komen camna ya CK?
ReplyDeletesinggah menabung save22&white untuk CK..
DeleteUntuk letak scrollbar dlm komen, insyaAllah CK akan tunjukkan...tapi kalau scrollbar yang cantik untuk komen, CK masih mengkaji kod2 dia sbb agak sukar main2 dgn kod CSS...
Delete*thanks aiza supported CK ;)
terima kasih CK, aiza pun tak reti sangat pasal ni, tu kena bertanya kepada yang berpengetahuan seperti CK.. aiza pernah cuba buat scrollbar tu&dah jadi, tapi tak puas hati sebab rasa macam tak cantik je bila aiza preview, terus aiza buang je.. mungkin sebab takde border kot di sekeliling kotak komen tu, aiza nak buat tak reti.. hehe, cerewet juga aiza ni.. sama-samalah kita menyokong rakan-rakan blogger..
Deletep.s:mengisi tabung save22&hishop untuk CK.. :D
Boleh sgt aiza...mana yg boleh CK bantu, insyaAllah CK akan sedaya-upaya membantu. Nanti CK postkan tutor nak buat scrollbar dgn border dan background color pada komen post...
DeleteSememangnya entri dan panduan ini sangat bermanfaat.
ReplyDeleteTerima kasih ye TI :)
Deletesalam ramadhan dan momoy follow sponsor GA sis mia ni
ReplyDeleteSalam ramadan...
DeleteTerima kasih Momoy. CK dah follow blog Momoy ;)
pakai skrollbar mmg byk manfaatnya
ReplyDeletefollower ke 315..jemput singgah ke blog Yumida & follow back klo sudi
http://umikasum.blogspot.com
Ya, betul tu...
DeleteTerima kasih Yumida. CK done follow u back ;)
Terima kasih buat entri ni. mmg sdg mencari
ReplyDeleteSama-sama ieta...hrp ianya bermanfaat ;)
Deletedh lama ambe cari tuto ni =) trima kasih CK
ReplyDeleteAlhamdulillah...jumpa di rumah CK ni :D.
DeleteBereih SKA :)
Pilih situs yang pasti pasti aja yuk boskuhh !!
ReplyDeleteBermain di #Komopoker terbukti 💯% aman & terpercaya lohh !!
Yuk buruan gabung sekarang juga GRATISS & nikmati keuntungannya :
✔️ Bonus New Member 30%
✔️ Bonus Deposit Harian 5%
✔️ Bonus Rollingan / Mingguan 10%
✔️ Bonus Refferal 10%
✔️ Bonus Cashback up to 0.3%
✔️ Proses Deposit & Withdraw yang cepat tanpa ribet
✔️ Deposit dapat melalui antar bank & via pulsa ( Telkomsel & XL )
Contact us :
👉 WA : +85515886681
👉 DAFTAR KOMOPOKER
👉 AGEN POKER DEPOSIT PULSA